During oil and gas well construction, oilfield service companies use substantial volumes of chemical reagents to prepare drilling fluids. These reagents are delivered in large polymer containers—intermediate bulk containers (IBCs)—which become production waste once emptied. Given geographically dispersed operations and remote field locations, managing empty containers escalates from a routine logistics task into a systemic environmental and financial challenge.
Using the example of Gazneftservice, which generates around 13,000 empty IBCs annually, Vladislav Gumennik, Head of the Industrial Safety Department, examines the limitations of standard waste management schemes. Handing containers directly over to specialized contractors costs the company RUB 255 million per year, and with annual tariff indexation, expenses are projected to reach RUB 326 million by 2027. Disposal costs per container reach RUB 20,000 compared to an average market rate of around RUB 1,000, as a de facto monopoly of a single licensed operator emerges at hard-to-reach fields.
Selling used IBCs on the secondary market also proves economically unviable. Buyers are located in major cities and impose strict requirements on the physical condition of the containers; consequently, the costs of cleaning out chemical residues, disposing of the resulting wash waste, and transporting the totes from remote fields exceed potential revenue. As a result, empty containers accumulate on-site, creating a range of operational risks:
To eliminate reliance on external waste operators, the company developed an in-house recycling process that converts waste into secondary raw material for internal use. The key feature of this solution is its mobile design, allowing the processing line to be deployed directly to container accumulation sites at oilfields and eliminating long-haul transport of empty totes.
The recycling production cycle comprises four sequential stages: preliminary steam cleaning of the container to remove chemical residues, shredding the plastic cage/bottle body into polymer flakes, feeding the material into a melting unit, and final compression molding. The output consists of finished polymer slabs ranging from 5 to 10 cm in thickness, depending on their intended operational use.
The presentation examines in detail two practical scenarios for using these recycled products at the company's own operational facilities:
The annual volume of 13,000 used containers is sufficient to outfit 14 drilling pads. With approximately 140 drilling rigs operating across the corporate group, internal demand secures a ten-year production pipeline for the mobile unit.
The project's financial model was built by comparing different levels of processing depth. An intermediate option involving shredding alone reduces physical waste volume prior to contractor handover and cuts baseline costs by 60%. Transitioning to full-cycle manufacturing of finished slabs reduces direct disposal expenses by 70%, saving RUB 232 million against the projected 2027 baseline. Substituting externally procured infrastructure materials provides further savings: eliminating third-party paving products for storage pads and walkways brings the total economic benefit to RUB 460 million.
Following pilot testing, full-scale rollout is scheduled to take ten months. The company has already purchased steam-cleaning and shredding equipment and submitted applications to amend its waste management license to cover waste treatment and recovery. Delivery of the melting and molding units is slated for Q1 2027, with the first batch of slabs scheduled for production in Q2 2027. In parallel, environmental compliance requirements are being met: laboratory testing is underway, industrial environmental control and monitoring programs are being established, and the mobile line itself is being registered as a regulated environmental impact facility.