Dynamic Light Demarcation of Lifting Equipment Hazard Zones Using GOBO Projectors

Case
19 November 2026 🇷🇺 Original language: русский

Limits of Human Attention and Systemic Risks in Load Handling

Loading and unloading operations involving lifting equipment remain one of the most challenging areas of industrial safety. Investigations into severe industrial accidents regularly reveal a familiar pattern: safety briefings were held, warning posters were displayed, audible alarms were functioning, and floor markings were in place—yet a worker still ended up inside the hazard zone. Kseniya Lazareva, Deputy Executive Director for Production Control and OHS at the SIB - DAMEL machine-building plant, shares how the facility addressed this challenge by implementing dynamic light demarcation.

Relying solely on human concentration fails for objective psychophysiological and operational reasons. The brain filters out repetitive signals due to habituation and the illusion of control—the false confidence that one can quickly slip past under a suspended load. At a facility with over a thousand pieces of machinery, including guillotine shears and welding stations, these risks are compounded by shop-floor conditions:

  • high noise levels require personnel to wear earplugs and earmuffs, making standard crane audible alarms physically inaudible as they blend into background noise;
  • restricted visibility from the cab or during pendant/remote operation creates blind spots when moving oversized loads, leaving the crane operator without full certainty that the area below is clear;
  • static painted floor markings quickly become covered in oil and dust or worn away by forklift wheels, requiring constant repainting costs without indicating the actual real-time position of a moving load;
  • mutual assumptions among participants create a false sense of security: the crane operator relies on people on the shop floor to stay alert, the rigger counts on the operator's instant reaction, and workers below underestimate the dimensions of the load.

An Engineering Barrier: Gobo Projectors on Overhead Cranes

To make the risk boundary visible directly in motion, the plant implemented dynamic light projection. A gobo projector synchronized with the lifting equipment's controller is mounted on the trolley or other moving parts of an overhead crane. When the crane starts up, the unit switches on automatically and projects a solid-colored illuminated zone onto the floor with a warning about the hazard area and the need to keep a safe distance.

A key engineering advantage of this approach is zero modification to the crane's structure. Installation is similar to mounting an auxiliary light fixture: kinematics and load-bearing elements remain untouched, meaning neither a separate engineering design nor a repeat industrial safety assessment is required. Installation and maintenance are handled by the plant's in-house mechanical and electrical maintenance department at a budget of 43,000 rubles per unit. Within six months, 19 out of the site's 21 overhead cranes were equipped with projectors, and the technology is also adaptable to jib and gantry cranes.

The optics were tested at a pilot station, factoring in ceiling heights of five to six meters and a wide range of loads—from small assemblies to powered roof support sections. Beam angle and brightness were selected so that the projection reads clearly on the floor without dazzling personnel or interfering with precision part alignment. The illuminated perimeter extends 25–30 percent beyond the load's footprint and, unlike floor paint, cannot be worn off by vehicles or require routine restoration.

Operating Procedures, Stop Work Authority, and Behavioral Audits

The engineering barrier was reinforced by redesigning work processes. Alongside projector procurement, the plant developed an interaction procedure for crane operators and riggers working with light projection and embedded the rules into daily practice:

  • pre-shift checks and communication—the crane operator and rigger jointly verify projection functionality before starting work, ensure no personnel are inside the illuminated perimeter, and use standardized hand and radio signals, including an emergency protocol if radio contact is lost;
  • Stop Work Authority—any worker on the shop floor who spots someone inside the projected light zone or notices a projector malfunction has the right to give a stop signal, which the crane operator and rigger are required to obey immediately;
  • on-the-job training—procedures were practiced hands-on with all shop-floor personnel under real operating conditions, posters featuring photos of the plant's own work areas were put up in the shops, and three targeted video briefings are broadcast during pre-shift briefings;
  • focused behavioral safety audits—oversight is structured as peer-to-peer observation and dialogue involving worker safety representatives, without blame or punishment.

This combination of technology and organizational controls shifted safety from forced compliance to conscious self-protection: the team perceives the illuminated perimeter as a clear, practical tool for protecting life and health.

What You Will Learn from This Presentation

  • Why do crane audible alarms and painted floor markings fail to protect personnel during load-handling operations in noisy workshops?
  • How can you install a gobo projector on an overhead crane and synchronize it with the controller in-house without structural modifications or a repeat industrial safety assessment?
  • How do you select brightness, mounting angle, and safety margin around load dimensions so the projection does not dazzle workers during precision part assembly?
  • What interaction rules for crane operators, riggers, and shop-floor staff should be included in the procedure to cover unauthorized entry into the hazard zone or loss of radio communication?
  • How can you reinforce worker response to dynamic demarcation through hands-on drills, pre-shift video briefings, and behavioral safety audits?
For Pro and VIP members
Structured summary with budget, timelines, team, and tools.
Choose plan

600+ cases and practices

Explore the full library of industrial safety best practices

Go to library
We use cookies to improve your experience · Cookie Notice

Join the leaders

14,000+ professionals · 128+ countries

1
Contacts
2
Profile

Registration

Tell us about yourself

Required field
Required field
Enter a valid email
Invalid number

Registration

Professional details

Required field
Required field
Required field

Please consent to newsletters. This will greatly enhance your platform experience.

Registration complete

We sent login credentials to your email. Use the password from the email to sign in.

Didn't receive the email?
Check your Spam folder
Already have an account? Sign In · Forgot password?

Welcome!

You have successfully signed in.

Don't have an account? Register · Forgot password?

Password Recovery

Enter your email to recover access

Enter a valid email

Link sent

A password reset link has been sent to the specified email. The link is valid for 1 hour.

Didn't receive the email?
Check your Spam folder
Remember your password? Sign In · Register